Description
Promo® 2000 is a light-scattering aerosol spectrometer system for particle size analysis and concentration determination that can be equipped with all welas® sensors.
On Promo® 2000, the welas® sensors equipped with different measurement volumes, as required, can be easily connected via fiber optic cables and interchanged as required. These sensors allow reliable measurement in the concentration range from < 1 particle/cm3 up to 106 particles/cm3 and are available for measurement in gases, as well as in liquids. Please observe the "welas® sensors" product data sheet.
Unique are up to four measuring ranges in only one device:
0.2 µm – 10 µm
0.3 µm – 17 µm
0.6 µm – 40 µm
2 µm – 100 µm (additionally for sensors 2300 and 2500).
Promo® 2000 is famous for up to 128 size channels per measuring range and a concentration range from < 1 particle/cm3 to 106 particles/cm3.
A touch display ensures user-friendly operation. Measurements can be started easily, and all data, such as the current number distribution and the number concentration, as well as 24 further statistical values, can be evaluated and displayed in real time.
With Promo® as a standalone measuring device (i.e. without external computer) measurements are performed continuously. All incoming data can be stored with a maximum temporal resolution of 1 s. Promo® 2000 can therefore measure and save data over weeks independently. For data transfer, Promo® can also be integrated into a company network.
Promo® 2000 has a standard interface and can be controlled by a process control system or by a simple Labview program. For this reason, Promo® 2000 is especially well suited for control and monitoring applications. Temperature, humidity and pressure sensors can be connected.
Palas® offers remote maintenance for the device and data access via www.palas.de/user.
The new Promo® 2000 measurement technology:
Promo® 2000 offers a new, fast 20 MHz signal processing processor, which analyses the progression of each particle signal. This makes it possible to recognise coincidental events in light scattering measurement technology at the individual signal and correct them (according to Dr. Umhauer / Prof. Dr. Sachweh). This way it is possible to increase the maximum concentration limit up to 106 particles/cm3 (welas® 2070 sensor). Also in low concentrations < 1 particle/cm3 with the welas® 2500 sensor, this leads to a higher measuring accuracy.
High classification accuracy and high particle size resolution are guaranteed by the following special features (see Graph 1):
White light and 90° light-scattering detection
⇒ Unambiguous calibration curve
Patented T-aperture
⇒ No border zone error
New digital individual signal processing
⇒ Coincidence detection and correction of the individual signal making it possible to measure higher concentrations
Graph 1: Example with 2200 sensor
Promo® 2000 is characterized by its very high counting efficiency starting from 0.2 µm!
Graph 2: Example with 2200 sensor, in relation to LAS-X II
The new Promo® 2000:
The Promo® 2000 is characterized by its optical fibre technology. The welas® aerosol sensor is connected via a fiber optic cable with a length up to 30 m with the Promo control unit. This leads to a minimization of particle losses in long sampling lines by simply installing the sensor directly at the sampling location.
Benefits
Measuring range of 0.2 to 100 µm (4 measuring ranges selectable in one device)
Up to four measuring ranges in only one device:
0,2 µm – 10 µm
0,3 µm – 17 µm
0,6 µm – 40 µm
2 µm – 100 µm (additionally for sensors 2300 and 2500)
Up to 128 size channels per measuring range
Concentration range of 1 particle/cm3 to 106 particles/cm3
Calibration curves for different refractive indices
Very high and reproducible counting efficiency rate starting at 0.2 µm
Pressure-resistant up to 10 barg (optional)
Heatable to 250 °C (optional)
Optical fibre technology
Simple operation with a large touch display
Calibration, cleaning and lamp replacement can all be performed independently by the customer
External control by RS 232 or Ethernet
With analysis software PDAnalyze
Optional: Software PDControl for operation as welas® digital available
Low maintenance
Reliable function
Reduces your operating expenses
Datasheet
Measuring range of 0.2 to 100 µm (4 measuring ranges selectable in one device)
Up to four measuring ranges in only one device:
0,2 µm – 10 µm
0,3 µm – 17 µm
0,6 µm – 40 µm
2 µm – 100 µm (additionally for sensors 2300 and 2500)
Up to 128 size channels per measuring range
Concentration range of 1 particle/cm3 to 106 particles/cm3
Calibration curves for different refractive indices
Very high and reproducible counting efficiency rate starting at 0.2 µm
Pressure-resistant up to 10 barg (optional)
Heatable to 250 °C (optional)
Optical fibre technology
Simple operation with a large touch display
Calibration, cleaning and lamp replacement can all be performed independently by the customer
External control by RS 232 or Ethernet
With analysis software PDAnalyze
Optional: Software PDControl for operation as welas® digital available
Low maintenance
Reliable function
Reduces your operating expenses
Applications
Measuring range of 0.2 to 100 µm (4 measuring ranges selectable in one device)
Up to four measuring ranges in only one device:
0,2 µm – 10 µm
0,3 µm – 17 µm
0,6 µm – 40 µm
2 µm – 100 µm (additionally for sensors 2300 and 2500)
Up to 128 size channels per measuring range
Concentration range of 1 particle/cm3 to 106 particles/cm3
Calibration curves for different refractive indices
Very high and reproducible counting efficiency rate starting at 0.2 µm
Pressure-resistant up to 10 barg (optional)
Heatable to 250 °C (optional)
Optical fibre technology
Simple operation with a large touch display
Calibration, cleaning and lamp replacement can all be performed independently by the customer
External control by RS 232 or Ethernet
With analysis software PDAnalyze
Optional: Software PDControl for operation as welas® digital available
Low maintenance
Reliable function
Reduces your operating expenses
|
|
|
| ||||||||||||||||||||||||
|
|
|
| ||||||||||||||||||||||||
|
|
|
| ||||||||||||||||||||||||
|
|
|
| ||||||||||||||||||||||||
|
|
购买咨询
(已有0条咨询)商品评论
(已有0条评论)购买流程
1.购买产品:点击“立即购买”→填写产品数量、联系方式并提交→会员顾问订单处理→合同签订。
2.咨询产品:请联系会员顾问或致电会员客服电话。
3.如果您还不是我们的会员,请先注册。
4.最小起订数量:1 ,进口产品货期,请跟产品担当联系!
品牌担当:
投诉电话:17717909117
联系方式: 电话:021-52069907 分机 或拨0转总机,传真:010-52060857
维修流程
- 1、技术沟通,初步判断问题电话,与客户进行初步沟通、了解并初步判断仪器所出现的故障问题。
- 2、签订维修协议由我公司向客户发送仪器维修协议,客户需如实填写内容并回传以便我司对仪器做进一步判断。
- 3、客户邮寄仪器客户可按照我司地址邮寄仪器,并将快递单拍照发送至您的专属客服进行备案。
- 4、详细诊断机器故障我司收到邮寄仪器后会对邮寄的仪器进行拍照并开箱检验,对仪器做进一步故障判断。
- 5、支付维修费用如客户仪器在保修期内,我司不收取任何维修费,如客户仪器在保修期外,我司会适当收取维修费。
- 6、邮寄仪器给客户我司将维修好的仪器按客户地址进行拍照并邮寄,自此虽维修协议终止,但我司将提供终身免费答疑及技术指导。
Testo 340 烟气分析仪 | Testo350 烟气分析仪 | PMS尘埃粒子计数器 | TSI尘埃粒子计数器 | Lighthouse尘埃粒子计数器 | Metone尘埃粒子计数器 |
HACH尘埃粒子计数器 | TSI气溶胶发生器 | ATI气溶胶发生器 | Palas气溶胶发生器 | Topas气溶胶发生器 | Palas静电中和器 |
Topas静电中和器 | Grimm粒径谱仪 | TSI粒径谱仪 | Topas粒径谱仪 | Palas粒径谱仪 | TSI扫描电迁移率粒径谱仪 |
HTV 甲醛检测仪 | HTV-M甲醛检测仪 | TVOC 检测仪维修 | Grimm扫描电迁移率粒径谱仪 | Palas扫描电迁移率粒径谱仪 | Brechtel扫描电迁移率粒径谱仪 |
TSI 8530粉尘仪 | TSI 8532粉尘仪 | TSI 8533粉尘仪 | Rad7 氡检测仪 | TSI 8534粉尘仪 | Thermo PDR-1500粉尘仪 |
ATI 2i光度计 | ATI气溶胶稀释器 | 风量罩 | 风速仪 | 空气品质检测仪 | EN779测试台改造 |
Dustmate 粉尘仪 | TSI 8108大颗粒气溶胶发生器 | TSI 3450单分散气溶胶发生器 | 车身气密性检测设备 | 风管漏风量测试设备 | 凝聚核粒子计数器校准装置 |
粒子计数器校准装置 | 更多型号请咨询客服19mro@19mro.com |
技术文档下载
- 2019-02-28 20:04Eurovent 4/21-2018,一般通风过滤器能效估算
- 2018-12-21 19:26Palas Promo 2000气溶胶粒径谱仪原版手册
- 2018-03-14 13:24GBT 14295-2008 空气过滤器
- 2017-12-29 15:27Topas ATM-243气溶胶发生器原版资料
- 2017-12-23 16:39检测用凝聚式气溶胶发生器的高压改造_吴宪,石岩
- 2017-12-21 17:26检测用凝聚式气溶胶发生器的高压改造_吴 宪,石 岩
- 2017-12-21 16:19一种纳米气溶胶发生系统的设计及性能测试_麦华俊,蒋靖坤,何正旭,郝吉明
- 2017-12-04 12:31Grimm 11-A 1.109粒径谱仪安装使用中文说明书
- 2017-11-11 15:45APS_SMPS_WPS对南京夏季气溶胶数浓度的对比观测_王飞
- 2017-11-11 15:24SMPS_3936气溶胶粒径谱仪测试原理及其性能评定_刘志军
- 2017-09-18 18:20新型流化床气溶胶发生装置及其特性_李永旺,赵长遂,吴新,韩松,鲁端峰,沈湘林
- 2017-07-07 17:07Palas Promo 2000,3000气溶胶粒径谱仪原版资料
- 2016-05-27 14:21Palas HMT1000油雾分离器产品ppt
- 2015-09-04 17:16AGMASOL PS40原版资料
- 2015-08-03 08:58德国Topas Lap-322粒径谱仪操作手册
相关商品