Labconco 115V 60 HZ W/IONIZER 生物安全柜/外壳

Labconco 115V 60 HZ W/IONIZER 生物安全柜/外壳

专门为纳米粒子的研究操作设计

99.999％ ULPA排气过滤器去除颗粒降到0.12微米和恢复实验室清洁空气

工作表面容易擦拭保持清洁

外壳采用不锈钢两侧内胆，可拆卸的挡板和空气箔

XPERT纳米机箱设计节省空间，不需要单独的过滤抽风机，低分贝级操作运行。内侧挡板，空调箔和整体表面都是304不锈钢。外观是冰川白色和灰色，干粉环氧树脂涂层铝和钢。该罩有一个预接线的荧光灯以及鼓风机，光开关。前窗框1/4“（0.6厘米）厚的钢化安全玻璃，符合人体工程学的角度和铰链腰带轴心向上，锁在向上的位置，含有污染物的擦拭密封，5'和6'型包括外部气体辅助提升。

外壳配有符合人体工程学的空气箔与空气动力学清洁扫描气流的开口，挡板向下转动或可拆卸清洗。该款内置电离器中和由发射离子的气流中的内表面上的静电荷，这有助于减少称量误差，并最大限度地减少粉末被吸引到表面。

顶部进入排气ULPA过滤器99.999％有效颗粒小至0.12微米。优化过滤器的位置可对整个表面进行漏洞扫描。过滤器具有真正的bag-in/bag-out过滤处理系统（需要认证的技术人员），以及内置的风机动态的平衡，振动隔离电动风扇和速度的控制。风机有40％的储备作为认证的技术人员所需要的过滤加载，所以速度可能会有所调整。Guardian气流显示器持续监控气流，气流在设定点范围内，绿色LED发光。气流超出设定点范围，红色LED发光并发出报警声时。外壳具有本质安全、负压增压设计载荷和压力计监测过滤器。

注意：所有型号都需要一个支架。伸缩底座构造1¾“钢管和可调1”增量27½到35½“高。支架固定的脚。右侧的配件订购。

所有型号都符合以下法规和标准：
SEFA 1-2002 
ASHRAE 110-1995 修订 
ANSI Z9.5-1993 
UL 3101-1/61010-1
CAN / CSA ​​C22.2号1010.1 
CE合格标志（230伏特机型）防护配备如平衡外壳是必不可少的，以维护劳动者的健康和安全。平衡外壳，通风柜，通风外壳等物品，保护工人免受危害烟雾，粉末或化学品。外壳款式包括墙壁安装，自由站立，和台式，覆盖需要的每一处。

Specifically designed for nanoparticle research and manipulation

99.999% ULPA exhaust filter removes particles down to 0.12 microns and returns clean air to laboratory

Work surface is easy to wipe down and keep clean

Enclosures feature stainless steel interior sides, and removable baffle and air foil

The XPert Nano enclosures features a space-saving design—no separate filtered exhauster is required and runs with low decibel-level operation. The interior sides, baffle, air foil and integral work surface are all 304 stainless steel. The exterior is glacier white and gray, dry powder epoxy-coated aluminum and steel. The hood has a pre-wired fluorescent lamp and switches for blower and light. The front sash is 1/4" (0.6 cm) thick tempered safety glass. The ergonomic angled and hinged sash pivots upward, locks in the “up” position, and has a wiping seal to contain contaminants. The 5' and 6' models incorporate an external gas-assist lift.

Enclosures feature ergonomic air foil with aerodynamic Clean-Sweep airflow openings, and baffle pivots down or may be removed for cleaning. Models with built-in ionizer neutralizes static charge on interior surfaces by emitting ions in the airstream, which helps reduce weighing errors and minimizes powders being attracted to the surface.

The top-accessible exhaust ULPA filter is 99.999% efficient on particles as small as 0.12 microns. Optimal filter location permits leak scanning of entire surface. Filter features true bag-in/bag-out filter disposal system (requires certified technician), and the built-in blower has a dynamically-balanced, vibration-isolated motorized fan and speed control. Blower has a 40% reserve so the speed may be adjusted as needed by a certified technician as the filter loads. The Guardian airflow monitor continuously monitors airflow with a green LED that glows when airflow is within set point range and a red LED that glows and an audible alarm that sounds when airflow is outside set point range. Enclosure features a intrinsically safe, negative pressure plenum design and pressure gauge to monitor filter loading.

Note: All models require a supporting stand. The telescoping base stand are constructed of 1 ¾” tubular steel and are adjustable in 1” increments from 27 ½ to 35 ½” high. Stands have fixed feet. Order from accessories at right.

All models conform to the following regulations and standards:
SEFA 1-2002
Modified ASHRAE 110-1995
ANSI Z9.5-1993
UL 3101-1/61010-1
CAN/CSA C22.2 No. 1010.1
CE Conformity Marking (230 volt models)Protective equipment like a balance enclosure is essential to maintaining the health and safety of workers. Items such as a balance enclosure, fume hood, or vented enclosure, protect workers from hazards fumes, powders or chemicals. Enclosure styles include wall mounted, free standing, and bench-top units to cover every need.