Cole-Parmer 4243CP高精度的37°温度计

Cole-Parmer 4243CP高精度的37°温度计

分辨率为0.01° 

显示日期和时间/最高温度 

高和低的可设置的警报 

可溯源至NIST的准确性 

依照国际标准四个数字体温计为关键需求提供所需的确切数据,质量控制检查,常规测量。单位读取0.00，25.00，37.00或三者为0.01°的分辨率，±2°C的标准，精度±0.05°C。单位读取°C和°F。 

防渗不锈钢探头 

单位提供的不锈钢探针显示温度变化。探头是用于液体，空气/气体和半固体的。准确的读数，以1/3英寸的尖端穿透。探针的直径1/8英寸，制止6-1/4英寸，9英寸总长度为5英尺长的电缆长度。 

单位符合ITS-90国际温标 

绝对高精度温度计是理想的，用于测量水浴，小池，燃气系统，试剂，标准溶液，烘箱，培养箱，药品，石油产品，食品和废水的温度。 

记录日期和时间最小/最大读数、高/低报警警报 

显示屏上显示最小/最大电流和温度。最小/最大读数监测一夜，在任何时间段显示精确的时间和日期的最小/最大温度。当温度上升到高于或下降到低于高和低设置点，报警提供两个视觉（LED）和两个音频警报。单元显示的确切时间和日期时，双温度计警报被触发。报警器是可编程的增量为0.1°。即使温度恢复到非报警范围，视觉和声音警报持续信号。温度计的设计允许用户一键式校准。 

包含项目：支架，魔术贴，磁条和壁挂式安装使温度计放置在任何地方。提供了的Traceable®证书，不锈钢探头和两节AA电池进行连续1年不间断监测。

Cole-Parmer Extreme-Accuracy Thermometer 37.00°

Resolution is 0.01°

Displays date and time of min/max temperature

High and low settable alarms

Traceable to NIST for accuracy

Four Traceable International Standards Digital thermometers provide the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F. 

Impervious stainless-steel probe
Stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet. 

Unit conforms to ITS-90, International Temperature Standard
Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvets, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater.

Records time and date for MIN/MAX readings and hi/lo alarm alerts
Display shows minimum/maximum and current temperatures. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. Unit displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range. First thermometer ever designed to permit user one-button calibration.