PRODUCT DESCRIPTION: A few products are dual sourced, but there are many instances where Indestructible

Paint Companies technical development has provided alternatives. IP9029-R3 is one

example as a replacement for PL101, a higher heat resistant stoving enamel than PL101

and IP9139. With heat resistance increased from 500°C to 650°C, it also has superior thick

film forming properties at up to 6 thou (150 microns). As part of the evolution of these

high performance products, this has been developed Toluene free for certain US

applications.

It has been warmly welcomed in America as being superior to the US spec: TT-P-28 for

corrosion resistance to Skydrol and gear fluid.

APPROVALS /

SPECIFICATIONS:

MSRR 9029, OMat 7/1D

Pending:

Similar to BAEP 3519 (Pending PWA 578F)

Alternative to AFS 977, PL101 (NSN: 8010-99-220-4994), E3746, 4863-A-8000

Glyptal Number: 86009-P6430 and SSP501/502, Allison EMS 26710

Supersedes IP9139 and IP9029-R1; IP9029-R2, Allied Signal / Textron

Significantly superior to TT-P-28, but does not air dry

Honeywell P6430, NGPS 134, NSN: 8010-749-4329 (1 Litre) / 8010-99-258-2056 (5 Litres)

PERFORMANCE/USE: This material significantly exceeds the performance test for MSRR 9029, PWA 578,

Textron and TT-P-28 tests on steel. Testing includes:

 100 Hours at 650°C (1200°F) dry heat

 100 Hours at 150°C (300°F) in Ester lubricants with 100 gram scratch resistance

 3 Hours at 70°C (160°F) in Skydrol and 100 gram scratch (better than previous

product)

 100 Hours continuous salt spray

 10 Cycles 220°C (430°F) 4 hours – 20 hours salt spray cabinet BSTM.B117

APPLICATION: Surface Preparation: Ensure that surfaces are clean and dirt free

Pre-Treatment: One Part Product

Thinner/Reducer Addition: IP985-Reducer

Application Method: Spray application, wet on wet coats to give film weight of 52-85g

per square meter.

Application Specification: IPAS 15: Apply for RPS 661/15 for full process specs.