PPG PR148AF ADHESION PROMOTER 60ML 胶水
PR 148 AF 是单组分附着力促进剂,易于操作。 PR148 AF包含溶剂中的粘附力促进剂。
PR 148 AF is a one part adhesion promoter, easily to apply. PR 148 AF contains an adhesion promoter in a solvent.
为了获得聚硫密封胶金属表面的最佳的附着力,底漆应用于:
To obtain optimum adhesion of Polysulfide sealants to metallic surface, primer shall be use:
PR 148 AF 适用有溶解力的清洁表面使用,用干净的纱布或刷。
Apply PR 148 AF to solvent cleaned surfaces with clean gauze or brush.
标准状况下PR 148 AF 干燥至少30分钟(23℃,50%RH)。
At standard conditions allow PR 148 AF to dry 30 minutes minimum (23°C and 50% R.H).
如果密封胶在4小时内不能应用,重复此过程。
This procedure should be repeated if sealant cannot be applied within 4 hours.